Introducing the atmosCAL MFC Gas Divider
3
The accurate calibration of gas analysers is critical, during factory build, routine service but also for on-going field assessment of analyser performance. Protea has developed the atmosCAL Gas Blender to enable dilution of high concentration gas cylinders over lower concentration ranges, in order to calibrate gas analysers - allowing characteristics such as absolute reading, repeatability, reproducibility, linearity and response time to be tested on analysers.
Using multiple Mass Flow Controller (MFC) technology, generating required gas concentration is as simple as typing into the touchscreen the desired concentration and choosing the flow rate. MFC technology operates on the principle of thermal mass, and different gases require compensation. The atmosCAL embedded software is pre-loaded with a range of compensation factors so the majority of gases can be used with the atmosCAL without adjustment. Find out more at https://www.protea.ltd.uk/atmoscal.
Other Articles
CCS Online Monitoring Now Available
04
The Largest Benelux Event For Process Instrumentation
06
Meeting Marine Emissions Challenges
04
CCS Carbon Capture and Storage
01
Protea At The 2022 Asia Pacific Maritime Exhibition
23
APM Asia Pacific Maritime Exhibition In Singapore 16/03/22 - 18/03/22
08
First CEM Event For 2022 Is At Krakow In Poland 02/03/22 - 04/03/22
10
Lowest NO and NO2 MCERTS emissions analyser
03
Differences between CEN/TS 17337:2019 and TGN M22 for Portable FTIR Emissions Testing
11
GPS Enabled Gas Analysers
08
